Can You Use Fabuloso On Concrete: What You Need to Know First

Concrete floors can be hard to clean at times, and fabuloso can be used in certain cases to remove tough stains and moss; however, it is generally not recommended.

Using Fabuloso on concrete floors is not recommended, and although it is a pH-neutral multi-purpose cleaner, the ingredients present in the cleaner can react chemically with the concrete and weaken it. When using fabuloso on concrete floors, it should be diluted to avoid damage. 

This article will explain whether it is safe to use for cleaning concrete floors and the potential side effects.

We also share workarounds and cost-effective alternatives that will keep concrete clean without damage.

Can You Use Fabuloso On Concrete

Fabuloso, a popular household cleaning product, is known for its fresh scents and effectiveness in cleaning various surfaces. However, when it comes to using it on concrete, there are a few things to consider.

Primarily, Fabuloso is intended to be used on non-porous surfaces such as countertops, floors, and bathroom fixtures. On the contrary, concrete is a complex and porous substance. Although the pores are very minuscule, they can still absorb liquids.

Therefore, concrete surfaces must be cleaned and maintained using products that are specifically designed to do so. These products are safe and effective and don’t cause any harm to the surface.

However, if you still want to use Fabuloso, you should always use it on sealed, finished, or polished concrete surfaces.

To be sure, you can test it on a small area by applying a small amount of Fabuloso diluted with water and observing any adverse reactions, such as discoloration or changes in texture.

But it is never recommended to use it on bare or unsealed concrete.

Always follow the manufacturer’s instructions and opt for products specifically designed to clean and maintain your concrete surfaces to avoid future consequences.

How Much Fabuloso to Use on Concrete

It is essential to use the right amount of Fabuloso for effective cleaning. Therefore, in light of this, it becomes necessary to dilute it properly.

The ideal amount of Fabuloso to use on concrete depends on the size and condition of the surface you are cleaning. Additionally, it is crucial to test a small inconspicuous area before applying Fabuloso to the entire surface.

This will help ensure that there are no adverse reactions or discoloration.

Most of the brands recommend that you should mix one-fourth part of Fabuloso with 1 gallon of water. However, you can adjust the concentration for tougher stains for effective results.

Besides this, always follow the instructions provided by the manufacturer on the product label. These guidelines offer specific recommendations on how much Fabuloso to use on concrete surfaces and any precautions to take.

How to Use Fabuloso on Concrete?

Fabuloso is a versatile all-purpose multi-cleaner that can be used on various surfaces, including concrete.

Using it is a simple and effective way to clean and freshen your surfaces. Follow the below steps to use Fabuloso on concrete:

1. Dilute the solution:
   Start by diluting Fabuloso with water. The recommended ratio is one-fourth part Fabuloso to 1 gallon of water. This will ensure that the cleaner is not too strong and assist in preventing any potential damage to the concrete.
2. Prepare the surface:
   Remove any loose dirt or debris from the concrete surface before applying the solution. Use a sweep or broom to do this.
3. Apply the solution:
   Pour or spray the diluted Fabuloso solution onto the concrete once you have prepared the surface. Cover the entire area that needs cleaning.
4. Scrub and agitate:
   To effectively clean the concrete, brush or mop with stiff bristles to scrub and mix the solution into the surface. This will help loosen any dirt or stains.
5. Let it sit:
   After scrubbing, allow the Fabuloso solution to sit on the concrete for a few minutes. This will give it time to penetrate and break down stubborn stains or grime.
6. Rinse thoroughly:
   Rinse the solution from the concrete using clean water. You can either use a hose or bucket of water for this step.
7. Let it dry:
   Once rinsed, let the concrete surface air dry completely before walking or placing any objects on it.

Following the aforementioned steps, you can effectively use Fabuloso on your concrete surfaces, leaving them clean and refreshed.

Best Cleaners for Concrete Floors

Concrete floors are known for their durability and longevity but can still accumulate dirt, stains, and grime over time.

Although Fabuloso can be used on concrete floors with proper dilution and care, it is still best to use specialized cleaners specifically for concrete cleaning.

These cleaners effectively remove dirt, grime, and stains without compromising the integrity of the concrete.

Usually, floor cleaners are of three types:

Ph Neutral	Enzymatic Cleaner	Alkaline or Acidic Cleaners
1. Gentle yet effective in removing dirt and stains 2. Does not cause any damage or discoloration to the concrete surface 3. Can be used on both sealed and unsealed concrete floors	1. Contains enzymes that break down organic matter, such as grease, oil, and food stains 2. Useful for areas with heavy traffic or where daily spills occur	1. Used for tough stains or stubborn dirt buildup on your concrete floor 2. Designed to tackle more challenging cleaning tasks 3. Can effectively remove deep-seated stains or grime.

Based on these types, the top floor cleaners for concrete floors are:

ACT Concrete Cleaner

• Eco-friendly stain remover utilizing microbes for breaking down stains and waste.
• Ideal for spot-treating concrete; not recommended for large areas.
• Effective against grease, oil, animal waste, car fluids, gum, and pop stains.
• Environmentally friendly, USDA-certified, EPA tested, no rinsing required.

ZEP pH Neutral Floor Cleaner

• Zep PH Neutral floor cleaner is ideal for polished concrete floors and does not harm the polish layer. It helps restore shine and maintains the floor’s appearance.
• The application involves sweeping or vacuuming the floor, diluting the cleaner for light, medium, or heavy cleaning, mopping the floor, and rinsing with plain water.
• Suitable for sealed concrete, granite, marble, and stone floors but not for unsealed or outdoor concrete surfaces.
• Cleans and restores shine for polished concrete floors.

EZ Clean Neutral Floor Cleaner

• EZ Clean Neutral Floor Cleaner is ideal for PH-neutral cleaning of polished, epoxy-coated, or indoor concrete floors.
• Suitable for use on various water-safe surfaces, including those with grease.
• Excess water can be removed with a squeegee or mop, and rinsing is unnecessary.
• Safe for polished and epoxy-coated concrete due to its PH-neutral nature.

Simple Green Oxy Solve Total Pressure Washer Cleaner

• Simple Green Oxy Solve Total Outdoor pressure washer cleaner suitable for various outdoor surfaces like concrete, siding, wood, etc.
• Eco-friendly base with peroxide to lift stains; safe for plants, wildlife, and pets.
• Effective against dirt, grime, stains, mold, and mildew.
• Considered a “safer choice” by the EPA, it won’t harm plants or wildlife.

Sunnyside TSP All-Purpose Cleaner

• Cost-effective compared to other cleaners, it effectively removes dirt, grease, mildew, and soap scum.
• Prepares concrete surfaces for paint, best for indoor basement and garage cleaning.
• If mishandled, TSP is highly alkaline and may cause severe skin irritation or burns.
• Compatible with stains like dirt, grease, mildew, and soap scum; Alkaline liquid cleaner; Immediate working time.

While choosing a cleaner for your concrete floor, always follow the manufacturer’s instructions and test the product in a small inconspicuous area first to ensure compatibility with your specific flooring type.

Select the best cleaners for your concrete floors, maintain their appearance, and prolong their lifespan while ensuring a clean and hygienic environment.

Mopping Vs. Scrubbing Concrete Floors

Different methods can be used to clean the concrete floors. The most common approaches are mopping and scrubbing. The difference between the two can be explained with the help of the table:

	Mopping	Scrubbing
Advantages	A simple and cost-effective way to remove surface dirt, dust, and debris from concrete floors.	Breaks down dirt and grime that may be embedded in the pores of the concrete.
Suitable For	Generally suitable for regular maintenance and light cleaning tasks.	Ideal for deeper cleaning or stubborn stains by agitating the surface and removing grease or grime.
Tools Used	It can be done manually by individuals with essential tools such as buckets, mops, etc.	Involves using mechanical equipment such as power washers, scrub brushes or floor scrubber machines, etc.

Both mopping and scrubbing are effective methods for cleaning concrete floors. Choosing between these methods depends on factors such as the level of dirtiness and the size of the area being cleaned.

Key Takeaway

As a general rule, using Fabuloso on concrete floors can weaken them and cause other damage such as discoloration of floors, etc. However, it can still be used on concrete floors, provided it is diluted appropriately. You must take all the necessary precautions to prevent any potential damage.

Using Fabuloso on concrete properly involves preparing a dilute solution, applying it gently, scrubbing if necessary, and rinsing thoroughly. Alternatively, it is best to use specialized concrete cleaners available in the market that will provide optimal results. Of these two, whichever method you choose, it is very sure that regular cleaning and maintenance of concrete floors will help them look clean and well-maintained for years to come.

Prioritize the care and longevity of your concrete surfaces and ensure their lasting beauty and functionality by using appropriate cleaners!